Alfa Romeo Brera MOT pass rate: 71.2% (1,626 tests, 2025)
Last updated · OBDCode UK editorial
How the Brera compares
Alfa Romeo Brera
71.2%UK average (all Class 4 vehicles)
77.5% across 33.1 million testsAlfa Romeo average (all models)
72.2%What fails most on the Alfa Romeo Brera
Across failed and rectified tests in 2025, these vehicle systems produced the most defects on the Brera:
Scroll horizontally to read every column.
| # | System | Defects recorded | Share |
|---|---|---|---|
| 1 | Suspension | 387 | 28.7% |
| 2 | Brakes | 285 | 21.1% |
| 3 | Lamps, reflectors and electrical equipment | 214 | 15.9% |
| 4 | Tyres | 147 | 10.9% |
| 5 | Noise, emissions and leaks | 136 | 10.1% |
| 6 | Body, chassis, structure | 122 | 9.1% |
Pre-MOT checklist for Brera owners
Based on the failure profile above, ten minutes with a torch before your test removes the most likely fail items:
- Bounce each corner and listen for clonks over speed bumps — suspension is this model’s (and the UK’s) top failure system
- Feel for a spongy pedal or pulling to one side; check pad wear through the wheel spokes if visible
- Walk round with all lights on: one blown bulb is the most avoidable fail there is
- Check tread with the 20p test and inspect sidewalls for cracking — tyres close to the limit are the country’s most common advisory
- A blowing exhaust or visible smoke will fail; warm the engine fully before the test
An illuminated engine management light is a Major MOT defect. Read the code, repair the cause, then confirm the light stays off — clearing a code alone is not a repair.
Same-vehicle follow-up
The defect groups above are a single-year count. The prognosis registry follows the same vehicle_id into the next MOT year. The extracts do not record the repair, a turbo part number, or a gearbox type.
- Suspension: advisory follow-up · did the same fail item hold
- Brakes: advisory follow-up · did the same fail item hold
- Tyres: advisory follow-up · did the same fail item hold
- Noise, emissions and leaks: advisory follow-up · did the same fail item hold
- Body, chassis, structure: advisory follow-up · did the same fail item hold
Check a specific Brera before you buy
Pass rates describe the model; they can’t tell you about the one car you’re looking at. Run its plate through our free MOT history check to see its personal record of failures, advisories and mileage readings.
Other Alfa Romeo models
FAQs
What is the MOT pass rate for an Alfa Romeo Brera?
In 2025, 71.2% of 1,626 first MOT tests on the Alfa Romeo Brera were passes (UK average: 77.5%). Data: DVSA anonymised MOT results.
What does the Brera fail its MOT on most?
The biggest defect group is suspension (28.7% of its recorded defects), followed by brakes.
Is the Alfa Romeo Brera reliable?
MOT pass rate is one lens on durability: at 71.2% it performs below the national average at a median age of 17 years and 91,478 miles. Always check the individual car's history too.
Before you agree to the work
A fault or an advisory is a quote waiting to happen. These pages set out what a garage has to tell you, what a comparable written quote should include, and what you can do if the bill is not what you agreed.
- Estimates, quotes and extra work — what a price has to cover, and when a garage may charge more than it first said.
- What a diagnostic test costs — what the fee should include, and when it should come off the repair.
- Tools — when to buy and when to skip — how to choose a diagnostic tool, and when a garage visit is cheaper than owning one.
- Choosing a garage you can check — what to verify before you hand over the keys.
- Your rights after a car repair — what to do when the work is not right, and how to put it in writing.
Source: DVSA Anonymised MOT tests and results, 2025 extract (Class 4 initial tests only; retests excluded). Contains public sector information licensed under the Open Government Licence v3.0. Figures rounded to one decimal place.