Hyundai I10 SE Connect Mpi MOT pass rate: 89.9% (7,738 tests, 2025)

Last updated · OBDCode UK editorial

The Hyundai I10 SE Connect Mpi passed 89.9% of its 7,738 MOT tests in 2025 — 12.4 points above the UK average of 77.5%. The median tested example was 4 years old with 18,627 miles on the clock.
89.9%Pass rate (2025)
7,738MOT tests analysed
18,627 miMedian mileage at test
4 yrsMedian age at test

How the I10 SE Connect Mpi compares

Hyundai I10 SE Connect Mpi

89.9%

UK average (all Class 4 vehicles)

77.5% across 33.1 million tests

Hyundai average (all models)

79.4%

What fails most on the Hyundai I10 SE Connect Mpi

Across failed and rectified tests in 2025, these vehicle systems produced the most defects on the I10 SE Connect Mpi:

Scroll horizontally to read every column.

#SystemDefects recordedShare
1Tyres31829.5%
2Visibility28826.7%
3Lamps, reflectors and electrical equipment21119.6%
4Seat belts and supplementary restraint systems17716.4%
5Brakes857.9%

Pre-MOT checklist for I10 SE Connect Mpi owners

Based on the failure profile above, ten minutes with a torch before your test removes the most likely fail items:

  • Check tread with the 20p test and inspect sidewalls for cracking — tyres close to the limit are the country’s most common advisory
  • Replace smeared wiper blades and top up washer fluid — both are test items
  • Walk round with all lights on: one blown bulb is the most avoidable fail there is
  • Pull every belt sharply to confirm it locks, and check for cuts and fraying
  • Feel for a spongy pedal or pulling to one side; check pad wear through the wheel spokes if visible
Engine management light on?

An illuminated engine management light is a Major MOT defect. Read the code, repair the cause, then confirm the light stays off — clearing a code alone is not a repair.

Understand the engine management light and MOT rules →

I10 SE Connect Mpi pass rate by registration year

Scroll horizontally to compare every registration-year column.

Registration yearTestsPass rateVs same-ageMedian mileagePass-rate bar
2020 6,712 92.8% +2.9 pts 16,880 92.8% visual scale
2021 5,662 88.8% -1.7 pts 17,010 88.8% visual scale
2022 2,559 89.5% -1.7 pts 15,878 89.5% visual scale

Same-vehicle follow-up

The defect groups above are a single-year count. The prognosis registry follows the same vehicle_id into the next MOT year. The extracts do not record the repair, a turbo part number, or a gearbox type.

On this model, these certificate lines have a published follow-up (cohort at least 200 cars):

Check a specific I10 SE Connect Mpi before you buy

Pass rates describe the model; they can’t tell you about the one car you’re looking at. Run its plate through our free MOT history check to see its personal record of failures, advisories and mileage readings.

Other Hyundai models

FAQs

What is the MOT pass rate for a Hyundai I10 SE Connect Mpi?

In 2025, 89.9% of 7,738 first MOT tests on the Hyundai I10 SE Connect Mpi were passes (UK average: 77.5%). Data: DVSA anonymised MOT results.

What does the I10 SE Connect Mpi fail its MOT on most?

The biggest defect group is tyres (29.5% of its recorded defects), followed by visibility.

Is the Hyundai I10 SE Connect Mpi reliable?

MOT pass rate is one lens on durability: at 89.9% it performs above the national average at a median age of 4 years and 18,627 miles. Always check the individual car's history too.

Before you agree to the work

A fault or an advisory is a quote waiting to happen. These pages set out what a garage has to tell you, what a comparable written quote should include, and what you can do if the bill is not what you agreed.

Source: DVSA Anonymised MOT tests and results, 2025 extract (Class 4 initial tests only; retests excluded). Contains public sector information licensed under the Open Government Licence v3.0. Figures rounded to one decimal place.